How a Virtual Network Works
The following figure shows the working of a virtual network and its components in asystem.
Figure1-2Working of a Virtual Network
The figure shows a single system with one NIC. The NIC is configured with three VNICs. EachVNIC is assigned to a zone. Zone 1, Zone 2, and Zone3 are the three zones configured for use in the system. The zones communicate with eachother and with the external network by using their respective VNICs. The three VNICs connect to theunderlying physical NIC through the virtual switch. The function of a virtual switch is equivalentto the function of a physical switch as both provide connectivity to the systems.
When a virtual network is configured, a zone sends traffic to an external host in the same wayas a system without a virtual network. Traffic flows from the zone, through the VNIC to the virtualswitch, and then to the physical interface, which sends the data to the network.
The zones can also exchange traffic with one another inside the system if all the VNICsconfigured to the zones are part of the same VLAN. For example, packets pass from Zone1 through its dedicated VNIC 1. The traffic then flows through thevirtual switch to VNIC 3. VNIC 3 then passes the traffic toZone 3. The traffic never leaves the system, and therefore never violates theEthernet restrictions.
Alternatively, you can create a virtual network based on the etherstub. Etherstubs areentirely software based and do not require a network interface as the basis for the virtualnetwork.
Oracle also provides the Oracle Enterprise Manager Ops Center for managing some aspects of network virtualization, for example, the ability to create virtual networks inside a virtual data center. For more information about the Oracle Enterprise Manager Ops Center, see the documentation library at http://www.oracle.com/pls/topic/lookup?ctx=oc122&id=OPCCM.
Copyright © 2011, 2014, Oracle and/or its affiliates. All rights reserved.Legal Notices